GRAPT/RF Validation

From MyLabWiki
Revision as of 00:06, 5 July 2009 by Alex (Talk | contribs)

Jump to: navigation, search

GRAPT Overview

This experiment is trivial, nonetheless it validates the RF-part of the setup. It will also reveal whether additional hardware like LNA is required.


Currently, following NOAA satellites are active on 137 MHz APT and 1.7 GHz HRPT:

SAT APT Freq HRPT Freq Notes
NOAA-15 137.5000 MHz 1702.5 MHz VTX-1 / STX-2 / MSB / OMNI=RCP
NOAA-16 OFF 1702.5 MHz — / STX-2 / MSB / LCP
NOAA-17 137.6200 MHz 1698.0 MHz VTX-2 / STX-1 / LSB / RCP
NOAA-18 137.1000 MHz 1707.0 MHz VTX-1 / STX-3 / HSB / RCP
NOAA-19 137.9125 MHz 1698.0 MHz VTX-2 / STX-1 / LSB / RCP

Source: NOAASIS Satellite Status Information


Considering a time window of 24h starting at 10:00 UTC on Sat 13 June, there are many potentially useful passes.

NOAA passes occuring between 2009/06/13 10:00 – 2009/06/14 10:00 UTC

We only need a few good passes for successful experiment and they should be distributed over time in order to allow debugging and problem fixing between the passes.


  • Created this page preparing for the experiment to be carried out during the weekend 13-14 Jun 2009.
  • Need to upgrade laptops and install recent GNU Radio


  • Upgraded laptops to Ubuntu 9.04 and GNU Radio 3.2
  • Problems with example APT receiver since it uses 32k audio but my crap HW can only do 44k1 or 48k.


  • I realized that I brought a BNC male/male adapter instead of a female/female that I need to connect my antenna to the TVRX. Experiment postponed!


Lessons Learned

  1. Do not pack your gear in a hurry.

GRAPT Overview