Difference between revisions of "Beagleboard XM setup"

From MyLabWiki
Jump to: navigation, search
(Created page.)
 
 
Line 11: Line 11:
 
Start network with (edit /etc/network/interfaces):
 
Start network with (edit /etc/network/interfaces):
 
  $ /etc/init.d/networking restart
 
  $ /etc/init.d/networking restart
 +
 +
Set the date and time: http://www.cyberciti.biz/faq/howto-set-date-time-from-linux-command-prompt/
  
 
Useful packages:
 
Useful packages:
 
  $ sudo apt-get install vim ntp build-essential git sox alsa-utils libasound2-dev pkg-config
 
  $ sudo apt-get install vim ntp build-essential git sox alsa-utils libasound2-dev pkg-config
 +
  
 
Problems:
 
Problems:
 
* Network does not start at boot.
 
* Network does not start at boot.

Latest revision as of 13:09, 23 December 2014


This page contains my notes for configuring a Beagleboard XM.

Work in progress.


Get the latest Debian image from http://elinux.org/BeagleBoardDebian#BeagleBoard_xM (tested: bbxm-debian-7.7-console-armhf- 2014-10-29-2gb.img.xz)

Start network with (edit /etc/network/interfaces):

$ /etc/init.d/networking restart

Set the date and time: http://www.cyberciti.biz/faq/howto-set-date-time-from-linux-command-prompt/

Useful packages:

$ sudo apt-get install vim ntp build-essential git sox alsa-utils libasound2-dev pkg-config


Problems:

  • Network does not start at boot.